NETGEAR M4300 User Manual

Manage Device Security
528
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. In the Access Profile Name field, enter the name of the access profile to be added.
The maximum length is 32 characters.
7. Take one of the following actions:
• To activate an access profile, select the Activate Profile check box.
• To deactivate an access profile, select the Deactivate Profile check box.
• To remove an access profile, select the Remove Profile
check box.
We recommend that you deactivate the access profile before removing it.
8. Click the Apply button.
Your settings are saved.
The Packets Filtered field displays the number of packets filtered.
The following table describes the nonconfigurable information that is displayed.
Table 194. Access Profile Configuration Profile Summary
Field Description
Rule Type The action performed when the rules are matched.
Service Type The service type chosen. The policy is restricted by the service type
chosen.
Source IP Address Source IP address of the client originating the management traffic.
Mask The subnet mask of the IP Address.
Priority The priority of the rule.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)