Manage Device Security
591
M4300 Series and M4300-96X Fully Managed Switches User Manual
3. Assign the ACL by its name to a port.
For information about how to view the configurations, see View and Delete MAC ACL
Bindings in the MAC Binding Table on page 596.
To configure a MAC ACL:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security >
ACL > Basic > MAC
ACL.
The MAC ACL page displays the number of ACLs currently configured in the switch and
the maximum number of ACLs that can be configured.
The current number is equal to the
number of configured IPv4 and IPv6 ACLs plus the number of configured MAC ACLs.
6. In the Name field, specify a name for the MAC ACL.
The name string can include alphabetic, numeric, hyphen, underscore, or space
characters only.
The name must start with an alphabetic character.
Each configured ACL displays the following information:
• Rules. The number of rules currently configured for the MAC ACL.
• Direction
. The direction of packet traf
fic affected by the MAC ACL, which can be
Inbound or blank.
7. Click the Add button.
The MAC ACL is added to the switch configuration.
To Next Page
Loading...
