NETGEAR M4300 User Manual

Manage Device Security
617
M4300 Series and M4300-96X Fully Managed Switches User Manual
the currently attached ACL using that sequence number. If you do not specify a sequence
number (the value is 0), a sequence number that is one greater than the highest
sequence number currently in use for the VLAN ID and selected direction is used. The
valid range is 1 to 4294967295.
9. From the ACL Type
menu, select the type of ACL.
Valid ACL types include IP ACL, MAC ACL, and IPv6 ACL.
10. From the ACL ID menu, select to display all the ACLs configured, depending on the
ACL
type selected.
11. Click the Add button.
The VLAN ACL binding is added to the ACL VLAN Binding Table.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)