NETGEAR M4300 User Manual

Monitor the System
654
M4300 Series and M4300-96X Fully Managed Switches User Manual
A sampling interval of 0 disables counter sampling. The Allowed range is 0 to 86400
seconds.
9. Use Sampler Receiver Index to specify the sFlow receiver for this flow sampler.
If set to 0, the sampler configuration is set to default and the sampler is deleted. Only
active receivers can be set. If a receiver expires, then all samplers associated with the
receiver also expires. The allowed range is 1 to 8.
10. Use Sampling Rate
to specify the statistical sampling rate for packet sampling from this
source.
A sampling rate of 1 counts all packets. A sampling rate of 0 disables sampling. The
allowed range is 1024 to 65536.
11. Use Maximum Header Size to specify the maximum number of bytes to be copied from a
sampled packet.
The allowed range is 20 to 256.
12. Click the Apply button.
Your settings are saved.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)