NETGEAR M4300 - Page 664

Maintenance and Troubleshooting
664
M4300 Series and M4300-96X Fully Managed Switches User Manual
• Use SSL DH Weak Encryption Parameter PEM File. Select this option to transfer an
SSL Diffie-Hellman Weak Encryption Parameter File (PEM Encoded) to the device.
• Use SSL DH Strong Encryption Parameter PEM File. Select this option to transfer an
SSL Diffie-Hellman Strong Encryption Parameter File (PEM Encoded) to the device.
• Script
File. Select this option to transfer a text-based configuration script file to the
device. Y
ou must use the command-line interface (CLI) to validate and activate the
script.
• CLI Banner. Select this option to transfer the CLI Banner to the device. This file
contains the text to be displayed on the CLI before the login prompt.
• IAS Users.
Select this option to transfer an Internal Authentication Server (IAS) users
database file to the device.
The IAS user database stores a list of user name and
(optional) password values for local port-based user authentication.
• Factory Default Configuration. Select this option to transfer the factory default
configuration file to a remote system.
• Public Key Configuration. Select this option to transfer the public key file used for
configuration script validation to the device.
• Public Key Image. Select this option to transfer the public key file used for code
image validation to the device.
• Application. Select this option to transfer an application to the device.
• T
ech Support Commands File. Select this option to transfer a Tech Support
Commands file to the device.
The factory default is Software.
7. The Image Name
field is visible only when File T
ype Software is selected. Use Image
Name to select one of the images from the list:
• Image1. Specify the code image1 to retrieve.
• Image2. Specify the code image2 to retrieve.
8. The Verify field is visible when File
Type Software and Script File are selected. Select one
of the Verify options: None, Verify, No Verify regarding the transfer in the device software
code.
9. The Application File Name field is visible when File T
ype Application is selected. Enter
the application file name to download to the device.
10. Use Transfer Mode to specify what protocol to use to transfer the file:
• TFTP. Trivial File Transfer Protocol
• SFTP. Secure File T
ransfer Protocol
• SCP. Secure Copy Protocol
• FTP. File
T
ransfer Protocol
11. Use Server Address T
ype to specify either IPv4, IPv6, or DNS to indicate the format of the
TFTP/SFTP/SCP Server Address field.
The factory default is IPv4.