Maintenance and Troubleshooting
679
M4300 Series and M4300-96X Fully Managed Switches User Manual
The System Information page displays.
5. Select Maintenance > Troubleshooting > Full Memory Dump.
6. From the
Protocol menu, select the protocol used to store the core dump file.
Possible values are as follows:
• None. Disable core dump.
• TFTP. Set
TFTP protocol.
• NFS. Set NFS protocol.
• USB. Set USB protocol.
7. In the File Path field, enter the path to the location to store the core dump file.
8. In the File Name field, enter the core dump file name.
9. Select the Hostname option to append the host name to the core dump file name.
10. Select the T
ime-stamp option to append a time-stamp to the core dump file name.
1
1. Select the Switch Register Dump option to dump the switch chip register in case of an
exception.
12. Select the W
rite Core T
est option to test the core dump setup.
13. Select the Write Core option to create a core dump and store it to the previously configured
external server
.
Executing this procedure causes a reload of the device.
14. Select the Save Current Settings option to save the current settings of the system.
15. Click the Apply button.
The memory dump is sent to the specified location.
To Next Page
Loading...
