Configure System Information
85
M4300 Series and M4300-96X Fully Managed Switches User Manual
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System
Management Green Ethernet Green Ethernet Details.
6. From the Interface menu, select the interface.
7. Use the EEE Admin
Mode selection to enable or disable Energy Ef
ficient Ethernet Admin
Mode on the port. With EEE mode enabled, the port transitions to low power mode during a
link idle condition. The default value is Disabled. If EEE Admin Mode is not supported, then
N/A is displayed.
8. In the EEE Transmit W
ake Time field, enter the time for which MAC/switch must wait to go
back to active state from LPI state when it receives a packet for transmission. The range is
8 to 65535. The default value is 17.
9. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
