Maintenance
R&S
®
SMW200A
1160User Manual 1175.6632.02 ─ 16
Contact the Rohde & Schwarz customer support, see Chapter 15.6, "Collecting
Information for Technical Support", on page 1177.
14.3.3 Internal Adjustment Settings
Access:
► Select "System Config > Setup > System > Internal Adjustments".
In this dialog, you can perform internal calibration routines, and get information on
the last performed calibration.
The remote commands required to define these settings are described in Chapter 13.8,
"CALibration Subsystem", on page 788.
Performing Maintenance Tasks
To Next Page
Loading...
