Getting Started
R&S
®
SMW200A
55User Manual 1175.6632.02 ─ 16
Risk of touchscreen damage
Inappropriate tools or excessive force can damage the touchscreen.
Observe the following instructions when operating the touchscreen:
●
Never touch the screen with ball point pens or other sharp objects, use your fingers
instead.
As an alternative, you can use a stylus pen with a smooth soft tip.
●
Never apply excessive force to the screen. Touch it gently.
●
Never scratch the screen surface, for example with a finger nail.
●
Never rub the screen surface strongly, for example with a dust cloth.
For instructions on cleaning the screen, see Chapter 14.1, "Cleaning",
on page 1151.
2.2.1.2 Keys
Utility Keys
The utility keys cause the R&S SMW to return to a defined instrument state and pro-
vide information on the instrument and assistance.
For more information, refer to Chapter 11, "General Instrument Functions",
on page 656.
Table 2-1: Utility keys
Utility Key Assigned functions
PRESET Sets the instrument to a defined state
SAVE/RCL Saves and loads instrument setting
Accesses the file manager
LOCAL Switches from remote control to local (manual) control
SETUP Accesses the general instrument settings
HCOPY Opens the "Hardcopy" dialog for storing the current display in a file
INFO Displays status messages, error messages, and warnings
HELP Displays context-sensitive help text
On/Standby
The ON/STANDBY key switches the instrument from the standby to the ready state or
vice versa.
●
In the ready state, the LED is green. The instrument is ready for operation.
●
In the standby state, the LED is orange. The standby power mode keeps the power
switch circuits and the oven-controlled crystal oscillator OCXO active. In this state,
Instrument Tour
To Next Page
Loading...
