Rohde & Schwarz SMW200A - Multi-Segment Commands

Remote Control Commands
R&S
®
SMW200A
936User Manual 1175.6632.02 ─ 16
Example: see :MMEMory:DATA:UNPRotected on page 783
Multi-Segment Commands
Required options
See Chapter 4.8.1, "Required Options", on page 324.
[:SOURce<hw>]:BB:ARBitrary:WSEGment?
Queries the index of the currently processed segment.
Return values:
<WSegment> integer
Range: 0 to 1023
*RST: 0
Example: see Example "Configuring the output order of the segments"
on page 924
Usage: Query only
Manual operation: See "Current Segment/Current Segment Index" on page 343
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?
Queries the name of the waveform of the currently output segment of the multi-seg-
ment waveform.
Return values:
<Name> string
Example: See Example "Configuring the output order of the segments"
on page 924
Usage: Query only
Manual operation: See "Current Segment/Current Segment Index" on page 343
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT <Next>
Selects the segment to be output.
Parameters:
<Next> integer
Range: 0 to 1023
*RST: 0
Example: see Example "Configuring the output order of the segments"
on page 924
Manual operation: See "Segment" on page 343
SOURce Subsystem