Rohde & Schwarz SMW200A - Generation of an LTE Test Signal with Carrier Aggregation and 2 X2 MIMO each Com Ponent Carrier

Getting Started
R&S
®
SMW200A
105User Manual 1175.6632.02 ─ 16
2.4.2.5 Generation of an LTE Test Signal with Carrier Aggregation and 2x2 MIMO each
Component Carrier
The block diagram in this example depicts the generation of an EUTRA/LTE test signal
with two component carriers (intra-band carrier aggregation) and 2x2 MIMO fading
each, for example for UE tests. The instrument uses a coupled internal baseband
source and both RF outputs.
System Overview