General Instrument Functions
R&S
®
SMW200A
679User Manual 1175.6632.02 ─ 16
●
"Save/Recall"
For a detailed description, refer to Chapter 10.4, "Saving and Recalling Instrument
Settings", on page 628.
●
"Recall Setup"
If the "Recall Setup" is the only one user action assigned to the USER key, press-
ing this key triggers the R&S SMW to load immediately the user-defined preset file.
Recalling a user-defined preset file using the USER key is even faster than immediate
recall function provided by the SAVE/RCL key.
11.3.1 Define User Key Actions Settings
Access:
► Select "System Configuration > Setup > User Interface > Define User Key".
The dialog displays a list of the currently enabled actions and provides functions to
define new, edit or remove existing actions. If no actions have been defined, the list
is empty.
For an example on how to use the provided settings, refer to:
●
Chapter 11.3.2, "How to Open Frequently Used Dialogs", on page 681
●
The application sheet RS_SMW_FastDataAlignment_AppSheet, available for
download at www.rohde-schwarz.com/manual/smw200a.
The remote commands required to define these settings are described in Chap-
ter 13.11, "DISPlay Subsystem", on page 796.
Name
Enters a user-defined name for the action.
Assigning Actions to the User Key
To Next Page
Loading...
