General Instrument Functions
R&S
®
SMW200A
680User Manual 1175.6632.02 ─ 16
Wizard
Defines the action to be executed.
"Load SCPI
Script"
Upon the selecting the action, the SCPI script is loaded and execu-
ted.
"Recall Setup"
Load a setup for quick access to the user-defined settings
"Open Dialog, with Position and Size/append to SCPI"
Quick access to the selected dialog.
Use the "Open Dialog, append to SCPI" function to define a
sequence of several dialogs to be opened simultaneously or one after
the other.
Tip: Use the command :SYSTem:WAIT to add a delay between the
subsequent commands.
Select
Depending on the selected "Wizard", provides access to:
●
The standard "File Select" function for loading of an SCPI script or setup file
●
A list of the dialog IDs of all currently opened dialogs. The dialog ID is used for dia-
log identification in the remote control.
See SCPI.
SCPI
For the currently selected action, displays the corresponding SCPI command with the
associated parameter for dialog identification (dialog ID). The automatically displayed
SCPIs are enabled for subsequent modification.
Remote command:
:DISPlay:DIALog:OPEN on page 800
See also :DISPlay:DIALog:ID? on page 799
Add, Change, Remove
Standard functions for managing of the actions.
Select Action to Execute > Define Action
Accesses the "Define User Key Actions" dialog.
Assigning Actions to the User Key
To Next Page
Loading...
