Rohde & Schwarz SMW200A - How to Find out a Function in Manual Operation Corresponding to a SCPI Com Mand

Network Operation and Remote Control
R&S
®
SMW200A
750User Manual 1175.6632.02 ─ 16
How to find the corresponding GUI function to a command
Conversely, if you are looking for a function in the GUI, which belongs to a SCPI, you
find it via a cross-reference in the online help and in the user manual.
See How to Find Out a Function in Manual Operation Corresponding to a SCPI Com-
mand.
12.14 How to Find Out a Function in Manual Operation Cor-
responding to a SCPI Command
If you are searching for the associated function to a remote command in the manual
operation (GUI), you can proceed as shown in the following example.
Example
Point of origin is the description of a remote control command in the user manual, in
the following example the "Trigger Mode" of the digital modulation dialog:
How to Find Out a Function in Manual Operation Corresponding to a SCPI Command