Rohde & Schwarz SMW200A - File Select Settings

File and Data Management
R&S
®
SMW200A
635User Manual 1175.6632.02 ─ 16
10.5.1 File Select Settings
The "File Select" dialog opens automatically each time you select a data list file as data
source or you select a control list.
To access a loadable data list file
1. Select the "Data List Name" in the individual dialog, e.g. for "Baseband > 3GPP
FDD > Base Stations > BS1 > Channel Table > P-CCPCH > Data = Data List"
select "DList = None".
A "File Select" dialog for loading, creating and modifying a file is displayed.
Tip: The name of the dialog is context-sensitive and differs depending on the par-
ticular function this dialog is from. However, the provided functions are similar.
2. To load an existing file:
Navigate through the file system.
Select the file and confirm with "Select".
3. To create a file, for example if there is no data list file specified:
Navigate through the file system.
Select "New" and specify the filename.
A new empty file is created and saved in the selected folder.
4. To edit an existing or newly created file:
Navigate through the file system.
Select the file and select "Edit".
Accessing Files with User Data