Rohde & Schwarz SMW200A - How to Create and Access Data and Control Lists

File and Data Management
R&S
®
SMW200A
637User Manual 1175.6632.02 ─ 16
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:CATalog
[:SOURce]:CORRection:CSET:CATalog? on page 1031
To list files with user data:
[:SOURce<hw>]:BB:DM:DLISt:CATalog? on page 913
[:SOURce<hw>]:BB:DM:CLISt:CATalog? on page 913
Functions for handling of data lists
Provided are the following standard functions for file handling:
"Select"
Select and load the file.
Remote command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 913
Refer to the descriptions of the firmware options for the correct syntax of the corre-
sponding SCPI command:
[:SOURce<hw>]:BB:<Digital Standard>:...:DATA DLISt
[:SOURce<hw>]:BB:<Digital Standard>:...:DSELect
"New"
Creates file with the specified "Filename".
To confirm, select "OK"; use "Cancel" to undo the operation.
To edit the file content, select "File Select > Edit".
"Edit"
Accesses the "Data List Editor" and loads the selected file for editing
See Chapter 4.6.3.7, "Data List Editor", on page 280.
Functions for handling of control lists
Provided are the following standard functions for file handling:
"Select"
Select and load the file.
Remote command:
[:SOURce<hw>]:BB:DM:CLISt:SELect on page 913
"New"
Creates file with the specified name. To edit the file content, select
"File Select > Edit".
"Edit"
Access the "Control List Editor" and loads the selected file for editing,
see Control and Marker Lists Editor.
Recent files
Displays the files last used.
File Manager
Accesses the "File Manager" dialog, see Chapter 10.8, "Using the File Manager",
on page 639.
10.5.2 How to Create and Access Data and Control Lists
The general principle for accessing files with user data is described in "To access a
loadable data list file" on page 635. Detailed and further information on how to create
and access files with user data like data lists and control lists is provided in the follow-
ing sections:
●
Chapter 4.6.4.2, "How to Create and Assign a Data List", on page 288
Overview of the possible ways and detailed description on how to create data lists.
Accessing Files with User Data