Signal Routing and System Configuration
R&S
®
SMW200A
139User Manual 1175.6632.02 ─ 16
● Select "Block Diagram > I/Q Stream Mapper > System Configuration > Fading/
Baseband Config"
● On the instrument front panel, press SETUP.
Select "System Configuration > Fading/Baseband Config"
The dialog comprises the settings required to configure the signal routing up to the
"I/Q Stream Mapper". A preview diagram shows a detailed view of the signal pro-
cessing for the currently selected configuration, together with a short description of
the possible application of this configuration.
If you are familiar with other Rohde & Schwarz signal generators, like the R&S SMU,
you expect that the block diagram displays the signal routing as it is done on the pre-
view diagram. Consider, however, that if in "Fading/Baseband Configuration > Mode >
Standard" this behavior is assured, for higher MIMO modes in "Mode > Advanced" the
block diagram is an abstract representation of the configuration.
This section focuses on the settings available in the "System Configuration" dialog.
For further details about the fading functionality, refer to the user manual "Fading Sim-
ulator".
For step-by-step description on how to use the provided settings, refer to Chap-
ter 3.9.3, "How to Define the MIMO Scenario", on page 193.
Settings:
Set to Default.............................................................................................................. 140
Mode........................................................................................................................... 140
Signal Outputs.............................................................................................................140
Signal Routing.............................................................................................................141
System Configuration LxMxN......................................................................................141
└ Entities (Users, Cells)................................................................................... 141
└ BB Signals (Tx Antennas).............................................................................142
System Configuration Settings
To Next Page
Loading...
