Rohde & Schwarz SMW200A - How to Store a Hardcopy of the Display

File and Data Management
R&S
®
SMW200A
655User Manual 1175.6632.02 ─ 16
10.10.2 How to Store a Hardcopy of the Display
1. Press the HCOPY key.
2. To define the output format, select "Format > JPG".
3. To enable the instrument to create output filenames, select "Automatic Naming >
On".
4. Select "Options...".
5. In the "Hard Copy Options" dialog:
a) To change the default directory the file is saved in, select "Automatic Naming
Settings > Path" and define a path and a filename. For example, select the
default directory /var/user.
b) If necessary, disable or change some of the parameters in the "Automatic
Naming Settings".
c) Close the "Hard Copy Options" dialog.
6. In the "Hard Copy" dialog, select "Save".
The instrument saves a hardcopy of the current instrument display as a *.jpg file.
The filename is automatically created.
7. To print the hardcopy, connect the instrument to a LAN and:
a) Transfer the file to a remote computer as described in Chapter 10.9, "How to
Transfer Files from and to the Instrument", on page 644.
b) On the remote computer, navigate through the file system.
c) Print the selected file.
For more information, refer to the online help of the operating system.
Creating Screenshots of Current Settings