Getting Started
R&S
®
SMW200A
52User Manual 1175.6632.02 ─ 16
3. Select "Calibrate".
4. Tap the calibration points.
The instrument completes the calibration process automatically and returns to the
"Check Front Panel" dialog.
2.2 Instrument Tour
The following topics help you get familiar with the instrument and perform the first
steps:
●
Front Panel Tour
●
Rear Panel Tour
This section explains the control elements and the connectors of the R&S SMW with
the aid of the front and rear views. For specifications of the interfaces, refer to the data
sheet.
2.2.1 Front Panel Tour
This section provides an overview of the control elements and connectors on the front
panel of the R&S SMW. On the rear panel, you find all further connectors of the unit,
see Chapter 2.2.2, "Rear Panel Tour", on page 60. The user interface can be dis-
played on a remote PC station used to manually remote control the instrument.
Instrument Tour
To Next Page
Loading...
