Rohde & Schwarz SMW200A - Setting for Handling the Multi-Segment Files and Output File Settings

Configuring the Internal Baseband Source
R&S
®
SMW200A
331User Manual 1175.6632.02 ─ 16
4. Select "Baseband > ARB > General".
The "Load Waveform" confirms that the current multi-segment file is loaded (file
name as defined with "Output File").
5. Select "Baseband > ARB > Trigger In (MSW)".
For a description of the provided settings, refer to Chapter 4.8.3.5, "Next Segment
Trigger In Settings", on page 342.
6. Select "Baseband > ARB > General > State > On" to process the configured multi-
segment waveform.
The remote commands required to define these settings are described in Chap-
ter 13.18.4.3, "SOURce:BB:ARBitrary Subsystem", on page 919.
● Setting for Handling the Multi-Segment Files and Output File Settings................ 331
● Segment Table......................................................................................................333
● Level / Clock / Marker Settings............................................................................. 335
● Multi-Segment Waveform Sequencing..................................................................337
● Next Segment Trigger In Settings.........................................................................342
4.8.3.1 Setting for Handling the Multi-Segment Files and Output File Settings
Access:
1. Select "Baseband > ARB > General > Create Multi Segment".
The "General" tab comprises standard functions for file handling, like selecting and
loading of files, or determining the output file name.
2. Perform one of the following:
● Select "New List" to create a multi-segment waveform file
● Select "Load List" to load an existing one
3. Add a comment and select "Output File" to define the file name the multi-segment
waveform is created at.
Note: The provided settings depend on the current waveform.
The "Sequencing List" function for instance requires that:
● Multi segment file is created, i.e. you have executed"Create Output File/
Create and Load Output File".
● "Sequence Table" contains more than one segment.
Settings:
New List...................................................................................................................... 332
Load List......................................................................................................................332
Save List/Save List As................................................................................................ 332
Sequencing List...........................................................................................................332
Comment.....................................................................................................................332
Output file....................................................................................................................332
Create/Create and Load..............................................................................................333
Generating Multi-Segment Waveform Files