Network Operation and Remote Control
R&S
®
SMW200A
757User Manual 1175.6632.02 ─ 16
12.17 How to Set Up Remote Operation via VNC
This section shows you some examples of the various possibilities to set up remote
operation.
●
Using a desktop system
– Chapter 12.17.1.1, "Using a Web Browser", on page 757
– Chapter 12.17.1.2, "Using a VNC Client Software", on page 757
●
Using a smart device
– Chapter 12.17.2.1, "Using a VNC App", on page 760
– Chapter 12.17.2.2, "Using a Web Browser with HTML5", on page 761
– Chapter 12.17.2.3, "Special Mode QR Code ", on page 762
Enabled direct control
The direct control of the instrument is not disabled and the instrument can be control-
led from the front panel and via the remote computer alternately.
12.17.1 Setting Up a Remote Operation from a Desktop System
12.17.1.1 Using a Web Browser
The R&S SMW supports remote operation via VNC with any web browser, like Win-
dows Internet Explorer or Mozilla Firefox for instance, or alternatively, an HTML5 web
browser.
To operate the instrument via a web browser remotely:
1. Install the JRE (Java Runtime Environment) on the remote computer.
Note: Skip this step if you are working with an HTML5 web browser.
2. Type the instruments' IP address in the address field of the web browser on your
PC, e.g. http://10.113.1.151
The VNC authentication screen appears.
3. Enter the password and confirm with "OK".
The default password is Instrument.
After the connection is established, the current screen of the signal generator is
displayed and the instrument can be remotely operated from the remote computer.
12.17.1.2 Using a VNC Client Software
A VNC client software is an application which can be used to access and control the
instrument from a remote computer through a LAN connection.
How to Set Up Remote Operation via VNC
To Next Page
Loading...
