Rohde & Schwarz SMW200A - Carrier Table Settings

Configuring the Internal Baseband Source
R&S
®
SMW200A
365User Manual 1175.6632.02 ─ 16
4.9.3.2 Carrier Table Settings
Access:
1. Select "Baseband > ARB > General > Multi Carrier".
2. Select "ARB: Multi Carrier > Carrier Table"
This tab comprises the settings of the individual carriers. A selectable carrier range
can be set with the aid of the optional "Carrier Table Assistant".
The settings of all available carriers are displayed in table form. Previously applied
assistant settings can be further refined. The number of lines corresponds to the
number of carriers.
The phase/deg settings are only valid if optimization of the crest factor is disabled
("Crest Factor Mode" = Off).
Use the "Carrier Graph" tab to visualize the selected multi-carrier configuration.
Settings:
Number of Carriers......................................................................................................365
No................................................................................................................................366
State............................................................................................................................366
Carrier Freq [MHz]...................................................................................................... 366
Gain.............................................................................................................................366
Phase..........................................................................................................................366
Delay...........................................................................................................................366
File.............................................................................................................................. 366
Info.............................................................................................................................. 366
!!!................................................................................................................................. 367
Number of Carriers
Defines the number of carriers of the multi-carrier waveform.
Generating Multi-Carrier Signals