Rohde & Schwarz SMW200A - List Mode Data Exchange

Remote Control Commands
R&S
®
SMW200A
1085User Manual 1175.6632.02 ─ 16
Usage: Event
Manual operation: See " List Mode Data " on page 484
[:SOURce<hw>]:LIST:FREE?
Queries the amount of free memory (in bytes) for list mode lists.
Return values:
<Free> integer
Range: 0 to INT_MAX
*RST: 0
Example: See Example "Create an RF list and activate the list mode"
on page 1074.
Usage: Query only
[:SOURce<hw>]:LIST:RESet
Jumps to the beginning of the list.
Example:
See Example "Create an RF list and activate the list mode"
on page 1074.
Usage: Event
Manual operation: See " Reset " on page 482
[:SOURce<hw>]:LIST:SELect <Filename>
Selects or creates a data list in list mode.
If the list with the selected name does not exist, a new list is created.
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example "Create an RF list and activate the list mode"
on page 1074.
Manual operation: See " List Mode Data " on page 484
13.18.11.3 List Mode Data Exchange
With the following commands, you can configure lists in ASCII format and export or
import them accordingly.
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog?....................................................... 1086
[:SOURce<hw>]:LIST:DEXChange:EXECute..................................................................1086
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension......................................................1086
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect........................................................... 1086
SOURce Subsystem