Rohde & Schwarz SMW200A - Calibration Subsystem

Remote Control Commands
R&S
®
SMW200A
788User Manual 1175.6632.02 ─ 16
<file_name> String parameter to specify the file name with extension
*.savrcltxt.
Example: See Example "Storing and loading current settings"
on page 778.
Usage: Event
Manual operation: See "Save" on page 631
:MEMory:HFRee?
Returns the used and available memory in Kb.
Return values:
<TotalPhysMemKb> integer
Total physical memory.
<ApplicMemKb> integer
Application memory.
<HeapUsedKb> integer
Used heap memory.
<HeapAvailableKb> integer
Available heap memory.
Usage: Query only
13.8 CALibration Subsystem
The CALibration subsystem contains the commands needed for performing internal
adjustments. This procedure is triggered by the query commands.
Suffix <hw>
Suffix Value range Description
CALibration<hw>
[1] to 2
●
CALibration[1] = Path A
(optional suffix)
●
CALibration2 = Path B
(mandatory suffix)
Understanding the query response
●
0: error-free execution of the adjustments
●
1: indicates that an error occurred; the process has been canceled
:CALibration:ALL[:MEASure]?......................................................................................... 789
:CALibration:DATA:FACTory:DATE?................................................................................789
:CALibration:ROSCillator[:DATA]..................................................................................... 790
:CALibration<hw>:CONTinueonerror................................................................................790
CALibration Subsystem