Rohde & Schwarz SMW200A - Querying Error Messages & Info Key

Troubleshooting and Error Messages
R&S
®
SMW200A
1175User Manual 1175.6632.02 ─ 16
Error
Code
Error Description Remedy
464 Invalid filename extension The file extension is not valid for the required
operation.
Check the file extension.
For instance, the file extension for wave-
form list files is *.wv. It is not possible to
enter another file extension when storing
a list.
465 File contains invalid data The selected file contains data that is not valid for
the file type.
The file extension determines the data that is valid
for this file type. If the file extension is changed,
the lists are no longer recognized and the data is
therefore invalid.
Example: the extension of a waveform file (=
*.wv) was changed to *.txt
Check the file extension.
15.4 Querying Error Messages & Info Key
The R&S SMW monitors the functions performed and automatically detects errors and
irregularities. The instrument displays the messages in the info-line and records them
in the background with a detailed description.
Find details to the system messages in Chapter 15, "Troubleshooting and Error Mes-
sages", on page 1172.
To display information on static errors and error history
1. Perform one of the following:
a) On the front panel, press the INFO key.
b) In the taskbar, select the "System Config > Info".
2. For some messages, the information line appears briefly on the block diagram.
Querying Error Messages & Info Key