Getting Started
R&S
®
SMW200A
89User Manual 1175.6632.02 ─ 16
2.3.8 Generating an EUTRA/LTE Signal
The main application field of the R&S SMW is the generation of digital signals in
accordance with several telecommunication and wireless standards, like WCDMA,
EUTRA/LTE or WLAN, to name a few. This example uses the digital standard
EUTRA/LTE to introduce the way you can access and interact with the instrument and
experience the advantages provided by the additional options.
The minimum requirement for R&S SMW in this example is a base unit equipped with
the additional option R&S SMW-K55 EUTRA/LTE.
To generate a downlink test signal
The main focus of the following example is not on the R&S SMW capabilities and the
features provided by the firmware option. The example aims rather to help you get
familiar with the settings and configuration principle common for the digital standards.
We use one of the provided EUTRA test models (E-TM) to show how to generate a
test signal upon a quick selection.
1. On the R&S SMW front panel, press the PRESET key to start out in a defined
instrument configuration.
2. In the block diagram, select "Baseband > Beyond 3G Standards > EUTRA/LTE".
The EUTRA/LTE dialog appears and displays the general settings provided for the
digital standard.
Trying Out the Instrument
To Next Page
Loading...
