Configuring the Signal in the RF Domain
R&S
®
SMW200A
434User Manual 1175.6632.02 ─ 16
7.3.2 RF Level Settings
Access:
► Select "RF" > "RF Level" > "Level".
In the "RF Level" dialog, you can configure the offset-free level, the level limit, and
the step width for varying the level with the rotary knob.
The remote commands required to define the settings are described in Chap-
ter 13.18.15, "SOURce:POWer Subsystem", on page 1092.
Configuring RF Frequency and Level
To Next Page
Loading...
