Rohde & Schwarz SMW200A - Marker Settings

Configuring the Internal Baseband Source
R&S
®
SMW200A
258User Manual 1175.6632.02 ─ 16
For more information, see:
●
"Impact of the Additional Trigger Settings" on page 241
●
"Specifying delay and inhibit values in time units" on page 243
The parameter Actual Trigger Delay/Actual External Delay displays the delay conver-
ted in time.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:DELay on page 909
[:SOURce<hw>]:BB:DM:TRIGger:OBASeband:DELay on page 907
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:TDELay on page 909
[:SOURce<hw>]:BB:DM:TRIGger:OBASeband:TDELay on page 908
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:DELay on page 957
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OBASeband:DELay on page 956
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:TDELay on page 958
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OBASeband:TDELay on page 956
[:SOURce<hw>]:BB:MCCW:TRIGger[:EXTernal]:DELay on page 998
[:SOURce<hw>]:BB:MCCW:TRIGger:OBASeband:DELay on page 996
Actual Trigger Delay/Actual External Delay
Displays the time (in seconds) an external trigger event or a trigger event form the
other path is delayed with.
See also "Specifying delay and inhibit values in time units" on page 243.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:RDELay? on page 909
[:SOURce<hw>]:BB:DM:TRIGger:OBASeband:RDELay? on page 907
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:RDELay? on page 958
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OBASeband:RDELay? on page 956
4.5.2.2 Marker Settings
Access:
► Select "Baseband > Custom Dig Mod > Marker".
This tab provides access to the settings necessary to select and configure the marker
output signal, like the marker mode or marker delay settings.
Common Functions and Settings in the Baseband Domain