Rohde & Schwarz SMW200A - Page 922

Remote Control Commands
R&S
®
SMW200A
907User Manual 1175.6632.02 ─ 16
Manual operation: See "Sync. Output to External Trigger/Sync. Output to Trigger"
on page 256
[:SOURce<hw>]:BB:DM:TRIGger:ARM:EXECute
Stops signal generation; a subsequent internal or external trigger event restart signal
generation.
Example: See also Example "Adjusting clock, marker and trigger settings"
on page 892
Usage: Event
Manual operation: See "Arm" on page 255
[:SOURce<hw>]:BB:DM:TRIGger:EXECute
Executes a trigger.
Example:
See Example "Adjusting clock, marker and trigger settings"
on page 892
Usage: Event
Manual operation: See "Execute Trigger" on page 255
[:SOURce<hw>]:BB:DM:TRIGger:OBASeband:DELay <Delay>
Specifies the trigger delay (expressed as a number of symbols) for triggering by the
trigger signal from the other path.
Parameters:
<Delay> float
Range: 0 to 2147483647
Increment: 0.01
*RST: 0
Example: See Example "Adjusting clock, marker and trigger settings"
on page 892
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 257
[:SOURce<hw>]:BB:DM:TRIGger:OBASeband:RDELay?
Queries the time a trigger event form the other path is delayed.
Return values:
<ObResTimeDelSec> float
Range: 0 to 688
Increment: 0.25E-9
*RST: 0
SOURce Subsystem