Rohde & Schwarz SMW200A - How to Display All Saved Files

File and Data Management
R&S
®
SMW200A
642User Manual 1175.6632.02 ─ 16
Local Folder
Enter a letter or an alias name to describe the folder.
In the directory tree, a mapped network folder is indicated as /shares/
<"Local Folder">.
User Name
Enter a user name of a user that has the permission to access the selected network
folder.
Password
Enter the password of the selected user.
Reconnect at Startup
Enables reconnecting every time you start up the instrument.
Connect
Triggers the instrument to prove the credential and to map (i.e. connect) the selected
network folder or computer to the instrument.
You can map up to 10 network folders.
Change
Applies the changes.
Disconnect
Disconnects the network drive.
10.8.3 How to Display All Saved Files
To display all files on the internal memory
1. Select SAVE/RCL > "File Manager".
2. Navigate to /var/user/.
To display all files on a connected USB flash drive
1. Select SAVE/RCL > "File Manager".
2. Navigate to /var/usb/.
To display all files in the volatile memory
1. Select SAVE/RCL > "File Manager".
2. Navigate to /var/volatile/.
Using the File Manager