Network Operation and Remote Control
R&S
®
SMW200A
714User Manual 1175.6632.02 ─ 16
The selected instrument also defines the identification string that is retrieved with query
*IDN?. If necessary, use the parameter Mode and IDN String to change this string.
As any other parameter, the remote control command set can also be changed
remotely by the command :SYSTem:LANGuage.
While working in an emulation mode, the R&S SMW specific command set is disabled
and the SCPI command :SYSTem:LANGuage is discarded.
To return to the SCPI command set of the R&S SMW, use the appropriate command of
the selected command set. If for example an HP generator is emulated, the HP com-
mand EX returns to the instrument-specific GPIB command set.
12.4.1 Network Settings
Risk of network failure
Consult your network administrator before performing the following tasks:
●
Connecting the instrument to the network
●
Configuring the network
●
Changing IP addresses
●
Exchanging hardware
Errors can affect the entire network.
Access:
► Select "System Config > Remote Access > Network".
Remote Access Settings
To Next Page
Loading...
