Rohde & Schwarz SMW200A - Shutting down and Rebooting the Instrument

General Instrument Functions
R&S
®
SMW200A
698User Manual 1175.6632.02 ─ 16
If you select a subsequently executed action, you can restore all the actions undone up
to this state.
11.7 Shutting Down and Rebooting the Instrument
The POWER ON/STANDBY front panel key switches the instrument from the standby
to the ready state or vice versa. In remote operation form a remote computer or in
manual control, there is another possibility to shut down the instrument or to reboot the
system.
Access:
► Select "System Config > Setup > Maintenance > Shut Down".
Remote control commands:
●
:SYSTem:REBoot on page 1137
●
:SYSTem:SHUTdown on page 1137
11.8 Reference
This section provides reference information on where to find the descriptions of all
functions accessed via the SETUP key. This reference information is provided in suc-
cessive order, i.e sorted in the order the corresponding function appears in the "Setup"
dialog.
This cross-reference information is useful, if you are familiar with the documentation of
other Rohde & Schwarz signal generators, like the R&S SMU.
Table 11-3: Setup Menu
Menu item Content Described in ...
General
System Configuration Introduces you to the various con-
figuration options.
Chapter 3, "Signal Routing and
System Configuration",
on page 122
Reference