Rohde & Schwarz SMW200A - Page 714

General Instrument Functions
R&S
®
SMW200A
699User Manual 1175.6632.02 ─ 16
Menu item Content Described in ...
Global Connectors Explains the possible, assignable
global connector interfaces.
Chapter 11.2, "Configuring the
Local and Global Connectors",
on page 661
Reference Freq / LO Coupling Describes the parameters for set-
ting the internal reference fre-
quency.
Chapter 7.4, "Reference Oscilla-
tor", on page 441
Internal Adjustments Describes how you can calibrate
your unit or individual compo-
nents.
Chapter 14.3.3, "Internal Adjust-
ment Settings", on page 1160
Baseband Powers Explains how you can retrieve the
power and peak power of the
generated signal at configurable
acquisition points.
Chapter 8.2, "Querying Informa-
tion on the Baseband Power Lev-
els", on page 588
Remote Access
Network Contains all relevant information
for the remote control of the
R&S SMW.
Chapter 12.4.1, "Network Set-
tings", on page 714
Visa Resource Strings Shows the VISA resource strings
provided for remote control via
the various interfaces.
Chapter 12.4, "Remote Access
Settings", on page 713
Instrument Emulations Enables you to emulate a remote
control command set of another
Rohde & Schwarz signal genera-
tor.
Chapter 12.4.5, "Instrument Emu-
lations Settings", on page 720
LXI Status Indicates the LAN - LXI connec-
tion parameters.
Chapter 12.5, "LXI Settings",
on page 723
Instrument Assembly
Hardware Config Provides an overview of all instal-
led hardware assemblies.
Chapter 14.3.8, "Requesting
Instrument Configuration and
Specifications", on page 1167
Versions / Options Contains a list of all installed soft-
ware assemblies, and versions of
the data sheet , specification .
Chapter 14.3.8, "Requesting
Instrument Configuration and
Specifications", on page 1167
Manage License Keys Explains how to enable an option
for the R&S SMW.
Chapter 11.4, "Managing Licen-
ses and License Keys",
on page 682
NRP-Z Info Update Provides information and firm-
ware update of a connected R&S
NRP power sensor.
Chapter 7.8.4.4, "NRP Info
Update", on page 551
User Interface
Graphics Describes the different ways of
graphical signal display, the con-
tent, and the application of the
various graphs and the available
signal sources.
Chapter 8.1, "Displaying Base-
band Signal Characteristics in
Real-Time", on page 559
Display Sets the GUI language. Chapter 11.1.1, "Display and Key-
board Settings", on page 657
Reference