Rohde & Schwarz SMW200A - Page 715

General Instrument Functions
R&S
®
SMW200A
700User Manual 1175.6632.02 ─ 16
Menu item Content Described in ...
Start/Stop Display Update Enables you to deactivate the
update function of the GUI.
Chapter 11.1.3, "Display Update
Settings", on page 659
Appearance Contains parameters for configur-
ing the transparency and instanta-
neous display of dialogs.
Chapter 11.1.2, "GUI Appearance
Settings", on page 659
Keyboard Sets the keyboard layout. "USB Keyboard > Layout"
on page 658
Define User Key Describes how to assign a func-
tion to the user key.
Chapter 11.3, "Assigning Actions
to the User Key", on page 678
Security
Security Contains security functions to pro-
tect the instrument against uncon-
trolled access.
Chapter 11.5.2, "Setting Security
Parameters", on page 688
Protection Provides different levels of protec-
tion for certain features specifi-
cally unlock.
Provides incremental protection
levels to unlock test functions, for
example for service purposes.
Chapter 11.5.1, "Protection Level
Settings", on page 687
Maintenance Chapter 14.3, "Performing Mainte-
nance Tasks", on page 1153
Shut Down Enables you to shut down or
reboot the instrument without
using the POWER ON/STANDBY
front panel key.
Chapter 11.7, "Shutting Down and
Rebooting the Instrument",
on page 698
Date / Time Contains the date and time set-
tings of the operating system.
Chapter 14.3.1, "Date and Time
Settings", on page 1154
Selftest Enables you to test the baseband
functions and connections.
Enhanced settings for testing the
baseband connections, and test-
ing the IQ signal source are provi-
ded when protction level 1 is
unlocked.
Chapter 14.3.4, "Selftest Connec-
tions Settings", on page 1163
Chapter 14.3.6, "Selftest Base-
band Settings",
on page 1166Chapter 14.3.5,
"Selftest Test Generator Settings
(DAC)", on page 1164
Check Front Panel Enables you to test the function of
the front panel keys.
Chapter 14.3.2, "Check Front
Panel", on page 1155
PCI-FPGA Update Provides updating the PCI-
FPGA.
Chapter 14.3.7, "FPGA/uC
Update Settings", on page 1167
Create R&S Support Information Creates a support file with ser-
vice-related information.
Chapter 15.6, "Collecting Informa-
tion for Technical Support",
on page 1177
Settings
Save/Recall Contains the main save and recall
function for managing of the
instrument settings.
Chapter 10.4, "Saving and Recall-
ing Instrument Settings",
on page 628
Reference