General Instrument Functions
R&S
®
SMW200A
658User Manual 1175.6632.02 ─ 16
In the "Display/Keyboard" dialog, you can change regional and language options
for the GUI and an external keyboard, and define the screen saver settings.
The remote commands required to configure the display and keyboard are described in
Chapter 13.11, "DISPlay Subsystem", on page 796 and Chapter 13.14, "KBOard
Subsystem", on page 808.
Screen Saver
Activates the screensaver.
If activated, the display including backlight is switched off after the selected Wait Time
elapses and if no entries via touch panel, front panel, external mouse, or external key-
board are made
Remote command:
:DISPlay:PSAVe[:STATe] on page 798
Wait Time
Enters the idle time that must elapse before the display lamp is shut off when no
entries are made.
Remote command:
:DISPlay:PSAVe:HOLDoff on page 798
USB Keyboard > Layout
Selects the language of an externally connected keyboard via USB. The function
assigns the corresponding keys automatically.
Customizing the User Interface
To Next Page
Loading...
