Rohde & Schwarz SMW200A - Automatic Naming

Remote Control Commands
R&S
®
SMW200A
805User Manual 1175.6632.02 ─ 16
:HCOPy:FILE[:NAME] <Name>
Determines the file name and path to save the hard copy, provided automatic naming
is disabled.
Note: If you have enabled automatic naming, the instrument automatically generates
the file name and directory, see Chapter 13.13.3, "Automatic Naming", on page 805.
Parameters:
<Name> string
Example: See Example "Store a hard copy of the display" on page 803
Manual operation: See "File..." on page 652
:HCOPy[:EXECute]
Generates a hard copy of the current display. The output destination is a file.
Example:
See Example "Store a hard copy of the display" on page 803
Usage: Event
Manual operation: See "Save" on page 652
13.13.3 Automatic Naming
Use the following commands to automatically assign a file name.
:HCOPy:FILE[:NAME]:AUTO?.........................................................................................805
:HCOPy:FILE[:NAME]:AUTO:DIRectory........................................................................... 806
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar................................................................. 806
:HCOPy:FILE[:NAME]:AUTO:FILE?................................................................................. 806
:HCOPy:FILE[:NAME]:AUTO:STATe................................................................................806
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe...............................................................807
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe..........................................................807
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe............................................................ 807
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?..................................................................807
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix..................................................................... 807
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe.......................................................... 807
:HCOPy:FILE[:NAME]:AUTO?
Queries path and file name of the hardcopy file, if you have enabled Automatic Nam-
ing.
Return values:
<Auto> string
Example: See Example "Store a hard copy of the display" on page 803
Usage: Query only
HCOPy Subsystem