Rohde & Schwarz SMW200A - Page 821

Remote Control Commands
R&S
®
SMW200A
806User Manual 1175.6632.02 ─ 16
:HCOPy:FILE[:NAME]:AUTO:DIRectory <Directory>
Determines the path to save the hard copy, if you have enabled Automatic Naming.
If the directory does not yet exist, the instrument automatically creates a new directory,
using the instrument name and /var/user/ by default.
Parameters:
<Directory> string
*RST: /var/user/
Example: See Example "Store a hard copy of the display" on page 803
Manual operation: See "Path..." on page 654
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar
Deletes all files with extensions *.bmp, *.jpg, *.png and *.xpm in the directory set
for automatic naming.
Example:
See Example "Store a hard copy of the display" on page 803
Usage: Event
Manual operation: See "Clear Path" on page 654
:HCOPy:FILE[:NAME]:AUTO:FILE?
Queries the name of the automatically named hard copy file.
An automatically generated file name consists of:
<Prefix><YYYY><MM><DD><Number>.<Format>.
You can activate each component separately, to individually design the file name.
Return values:
<File> string
Example: See Example "Store a hard copy of the display" on page 803.
Usage: Query only
:HCOPy:FILE[:NAME]:AUTO:STATe <State>
Activates automatic naming of the hard copy files.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example: See Example "Store a hard copy of the display" on page 803
Manual operation: See "Automatic Naming" on page 652
HCOPy Subsystem