Network Operation and Remote Control
R&S
®
SMW200A
718User Manual 1175.6632.02 ─ 16
Restart Network
Terminates the network connection of the instrument and subsequently sets it up
again. You can use this function to fix network problems.
Note: This function restarts only the connection of the instrument to the network. It
does not impact the network itself.
Remote command:
:SYSTem:COMMunicate:NETWork:RESTart on page 1126
12.4.2 VISA Resource Strings
Access:
► Select "System Config > Remote Access > VISA Resource Strings".
The "VISA Resource String" dialog displays the VISA resource strings provided for
remote control via the different interfaces.
Remote command:
:SYSTem:COMMunicate:HISLip:RESource? on page 1124
:SYSTem:COMMunicate:NETWork:RESource? on page 1125
:SYSTem:COMMunicate:SOCKet:RESource? on page 1129
:SYSTem:COMMunicate:GPIB:RESource? on page 1124
:SYSTem:COMMunicate:USB:RESource? on page 1129
:SYSTem:COMMunicate:SERial:RESource? on page 1128
Remote Access Settings
To Next Page
Loading...
