Getting Started
R&S
®
SMW200A
50User Manual 1175.6632.02 ─ 16
4. Close the dialogs.
The instrument adjusts the time according to the selected location.
To set the date and time
1. Press the SETUP key.
2. Select "Security > Protection".
3. Enable the "Protection Level 1".
The default password is 123456.
4. Select "Setup > Maintenance > Date / Time".
5. Adjust the settings.
6. Close the dialogs.
The instrument adopts the new date and time.
2.1.5.2 Setting the Keyboard Language
You can select the language of the external keyboard connected to the instrument.
To adjust the keyboard settings
1. Press the SETUP key.
2. Select "User Interface > USB Keyboard".
3. Select the "Layout".
The dialog closes and the changes take effect immediately.
2.1.5.3 Setting the Screen Saver
You can enable a screen saver that automatically turns off the display after a user-
defined period of time. The screen saver is activated if no settings are made on the
touch screen, or via keys or the rotary knob during the selected wait time.
To activate the screen saver
1. Press the SETUP key.
2. Select "User Interface > Display"
Preparing for Use
To Next Page
Loading...
