Monitoring Signal Characteristics
R&S
®
SMW200A
588User Manual 1175.6632.02 ─ 16
4. Observe the power spectrum display.
In addition to the changing level from fading, the power spectrum shows a noise
floor with constant level.
To print current power spectrum
1. Press HCOPY.
2. Use the default settings and select "Save".
The instruments creates a screenshot of the current screen and stores it in a file wit
ha predefined filename in the default user directory /usb/.
See Chapter 10.10, "Creating Screenshots of Current Settings", on page 651.
3. Use on of the standard file transfer methods to access the user directory of the
instrument. Transfer the file to a PC.
See Chapter 10.9, "How to Transfer Files from and to the Instrument",
on page 644.
4. Print the file content.
8.2 Querying Information on the Baseband Power Levels
The R&S SMW fulfills the requirements for a flexible configuration of signal power at
different processing points of the signal flow. This great flexibility, however, leads to a
variety of interdependent parameters grouped in different dialog boxes. This section
focuses on the "Baseband Powers" measurement functionality provided for retrieving
Querying Information on the Baseband Power Levels
To Next Page
Loading...
