Rohde & Schwarz SMW200A - How to Open Frequently Used Dialogs

General Instrument Functions
R&S
®
SMW200A
681User Manual 1175.6632.02 ─ 16
11.3.2 How to Open Frequently Used Dialogs
1. Open the dialog for that you are creating a quick access.
For example, select "Baseband > EUTRA/LTE > DL Frame Configuration > Time
Plan > Show Time Plan in Dialog".
2. Select "System Configuration > Setup > User Interface > Define User Key".
3. To create an action:
a) Specify the "Name".
E.g. LTE_ShowTimePlanDL.
b) Select "Wizard > Open Dialog"
c) Select "Select" and select the dialog ID from the list
The corresponding SCPI command is automatically displayed and can be later
modified.
4. Select "Add" to store the new action in the list of user key actions.
5. To execute the created action, press USER.
In the list of actions ("Select Action to Execute" dialog), navigate to the required
action.
In this example, this is "LTE_ShowTimePlanDL".
Assigning Actions to the User Key