Rohde & Schwarz SMW200A - Import;Export List Files

Configuring the Signal in the RF Domain
R&S
®
SMW200A
538User Manual 1175.6632.02 ─ 16
7.8.3.4 Import/Export List Files
Access:
► Select "Import/Export".
Import / Export List Mode Data Import / Export UCOR Data
The "Import/Export" dialog contains all functions and settings to import externally
created list data or to export it accordingly. You can process and store a list in the
formats *.txt (ASCII), or *.csv (plain text with identical sequence of fields). The
table separators and the decimal floating point numbers are customizable.
Settings
Mode .......................................................................................................................... 538
ASCII File Settings......................................................................................................538
Select Source/Select Destination................................................................................539
Select Source / Select ASCII Destination................................................................... 539
Import / Export.............................................................................................................539
Mode
Selects import or export of a data list file. The provided parameters vary according to
the selected mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:MODE on page 1087
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 1035
ASCII File Settings
Defines the format and the separators of the associated data file.
"Extension"
Selects *.csv or *.txt format.
Improving Level Performance