Getting Started
R&S
®
SMW200A
38User Manual 1175.6632.02 ─ 16
●
Check if all items listed on the delivery note, including this getting started manual,
are included in the delivery.
●
Check the R&S SMW for any damage.
If the contents are damaged, immediately contact the carrier who delivered the
package.
Packing material
Retain the original packing material. If the instrument needs to be transported or ship-
ped later, you can use the material to protect the control elements and connectors.
Risk of injury during transportation
The carrying handles at the front and side of the casing are designed to lift or carry the
instrument. Do not apply excessive force to the handles. If a handle is ripped off, the
falling instrument can cause injury.
Be aware of the weight of the instrument when lifting it. Observe the information on
transporting heavy instruments in the basic safety instructions provided with the instru-
ment.
2.1.1.3 Accessory List
The instrument comes with the following accessories:
●
Power cable
●
Getting Started printed manual
2.1.1.4 Placing or Mounting the Instrument
The R&S SMW is designed for use under laboratory conditions, either on a bench top
or in a rack using the standard rackmount kit.
Bench top operation
If the R&S SMW is operated on a bench top, the surface must be flat. The instrument
can be used in horizontal position, standing on its feet, or with the support feet on the
bottom extended.
Preparing for Use
To Next Page
Loading...
