Network Operation and Remote Control
R&S
®
SMW200A
728User Manual 1175.6632.02 ─ 16
Changing the LAN configuration
This function is password-protected. Unlock the protection level 1 to access it, see
"Protection Level/Password" on page 688.
Note: We recommend that you change the default password before connecting the
instrument to a network.
See Chapter 11.5.4, "Password Management", on page 694.
Ping Client
The "Ping Client" page provides the ping utility to verify the connection between the
LXI-compliant instrument and another device.
The ping is initiated from the instrument. Using the ICMP echo request and echo reply
packets, this function checks whether the communication with a device via LAN is
working. Ping is useful for the diagnosis of IP network or router failures.
To initiate a ping at the instrument:
1. On the "Ping Client" page, enter the IP address of the host in the "Destination
Address" field (for example 10.113.1.151).
2. Select "Submit".
SCPI Remote Trace
The remote trace functionality allows you to trace input and output strings at the
remote control interface of the R&S SMW, see Chapter 12.9, "Tracing SCPI Com-
mands and Messages Exchanged via the LXI Web Browser Interface", on page 741.
A recorded trace (message log) can be evaluated directly in the dialog. Use the high-
lighting and navigation functions provided by the lower toolbar to locate error mes-
LXI Settings
To Next Page
Loading...
