Remote Control Commands
R&S
®
SMW200A
807User Manual 1175.6632.02 ─ 16
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe <State>
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe <State>
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe <State>
Uses the date parameters (year, month or day) for the automatic naming. You can acti-
vate each of the date parameters separately.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example: See Example "Store a hard copy of the display" on page 803
Manual operation: See "Prefix, Year, Month, Day" on page 654
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
Queries the number that is used as part of the file name for the next hard copy in auto-
matic mode.
At the beginning, the count starts at 0. The R&S SMW searches the specified output
directory for the highest number in the stored files. It increases this number by one to
achieve a unique name for the new file.
The resulting auto number is appended to the resulting file name with at least three
digits.
Return values:
<Number> integer
Range: 0 to 999999
*RST: 0
Example: See Example "Store a hard copy of the display" on page 803
Usage: Query only
Manual operation: See "Current Auto Number" on page 654
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix <Prefix>
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe <State>
Uses the prefix for the automatic generation of the file name, provided PREF:STAT is
activated.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example: See Example "Store a hard copy of the display" on page 803
Manual operation: See "Prefix, Year, Month, Day" on page 654
HCOPy Subsystem
To Next Page
Loading...
