Rohde & Schwarz SMW200A - Page 972

Remote Control Commands
R&S
®
SMW200A
957User Manual 1175.6632.02 ─ 16
Parameters:
<ObasTimeDelay> float
Range: 0 to 2147.483647
Increment: 0.25E-9
*RST: 0
Default unit: s
Example: See Example "Specifying delay and inhibit values in time units"
on page 922
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 257
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OBASeband:INHibit
<Inhibit>
For triggering via the other path, specifies the number of samples by which a restart is
inhibited.
Parameters:
<Inhibit> integer
Range: 0 to 67108863
*RST: 0
Default unit: sample
Example: See Example "Managing waveform files" on page 920
Manual operation: See "External / Trigger Inhibit" on page 257
[:SOURce<hw>]:BB:ARBitrary:TRIGger:DELay:UNIT <TrigDelUnit>
Sets the units the trigger delay is expressed in.
Parameters:
<TrigDelUnit> SAMPle | TIME
*RST: SAMPle
Example: See Example "Specifying delay and inhibit values in time units"
on page 922
Manual operation: See "(External) Delay Unit" on page 257
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:DELay <Delay>
Specifies the trigger delay.
Parameters:
<Delay> float
Range: 0 to 2147483647
Increment: 0.01
*RST: 0
Example: see Example "Managing waveform files" on page 920
SOURce Subsystem