Rohde & Schwarz SMW200A - Page 973

Remote Control Commands
R&S
®
SMW200A
958User Manual 1175.6632.02 ─ 16
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 257
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:TDELay <ExtTimeDelay>
Specifies the trigger delay for external triggering. The value affects all external trigger
signals.
Parameters:
<ExtTimeDelay> float
Range: 0 to 2147483647/clock rate
Increment: 1E-9
*RST: 0
Default unit: s
Example: See Example "Specifying delay and inhibit values in time units"
on page 922
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 257
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
Return values:
<ResTimeDelaySec> float
Range: 0 to 688
Increment: 0.25E-9
*RST: 0
Example: See Example "Specifying delay and inhibit values in time units"
on page 922
Usage: Query only
Manual operation: See "Actual Trigger Delay/Actual External Delay" on page 258
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:INHibit <Inhibit>
Specifies the number of symbols by which a restart is inhibited.
Parameters:
<Inhibit> integer
Range: 0 to 21.47*clockRate
*RST: 0
Example: see Example "Managing waveform files" on page 920
Manual operation: See "External / Trigger Inhibit" on page 257
SOURce Subsystem