Troubleshooting and Error Messages
R&S
®
SMW200A
1176User Manual 1175.6632.02 ─ 16
To open the dialog, select the "Info" button.
The "Static Errors" dialog list the last monitored messages chronologically and dis-
plays additional information on the highlighted message.
In "Error History" dialog lists all accumulated messages with a short description.
If any critical error occurs, the R&S SMW automatically shows the
icon in the task-
bar. Select the icon to obtain information on the error and the number of occurrences.
The icon is assigned to permanent messages. The message and icon are displayed
until the error is eliminated.
Clear History
Clears all messages in the "History" view.
Remote command:
:SYSTem:ERRor:ALL? on page 1118
Each time a SYST:ERR:ALL? query is sent, the error queue is returned and at the
same time cleared.
:SYSTem:ERRor:HISTory:CLEar on page 1121
Clears the messages in the "History" view.
Show History / Show Static
Toggles between "History" and "Static" view of the info dialog.
Remote command:
:SYSTem:ERRor[:NEXT]? on page 1120
Each time a SYST:ERR? query is sent, the oldest entry in the error queue is returned
and at the same time cleared in the list.
Querying Error Messages & Info Key
To Next Page
Loading...
