Rohde & Schwarz SMW200A - Page 814

Remote Control Commands
R&S
®
SMW200A
799User Manual 1175.6632.02 ─ 16
Example: See Example "Activating screen saver mode and display
update" on page 797
Manual operation: See "Annotation Amplitude" on page 689
:DISPlay:ANNotation:FREQuency <State>
Indicates asterisks instead of the frequency values in the status bar.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: n.a. (factory preset: 1)
Example: See Example "Activating screen saver mode and display
update" on page 797
Manual operation: See "Annotation Frequency" on page 689
:DISPlay:ANNotation[:ALL] <State>
Displays asterisks instead of the level and frequency values in the status bar of the
instrument.
We recommend that you use this mode if you operate the instrument in remote control.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example: See Example "Activating screen saver mode and display
update" on page 797
:DISPlay:DIALog:ID?
Returns the dialog identifiers of the open dialogs in a string separated by blanks.
DISPlay Subsystem