Configuring the Internal Baseband Source
R&S
®
SMW200A
240User Manual 1175.6632.02 ─ 16
Figure 4-5: Trigger mode single
** = the signal is generated once to the length specified with "Trigger Signal Duration"
●
Auto
In auto trigger mode, the instrument generates a continuous signal.
Figure 4-6: Trigger mode auto
●
Retrigger
The instrument generates a continuous signal. With enabled retrigger, a new trig-
ger event aborts the current generation cycle and restarts the signal generation
from the beginning.
Figure 4-7: Trigger mode retrigger
Common Functions and Settings in the Baseband Domain
To Next Page
Loading...
